VELIMAX Frosted Privacy Window Film for Bathroom, Office, Home

VELIMAX White Lattice Window Frosted Film is designed to give a unique and sleek style to your windows and doors, offering privacy, blocking unsightly views, or serving decorative purposes. It prevents UV rays, reduces glare, and allows natural light to pass through, all while requiring no additional cleaning and costing a fraction of traditional solutions.

The film is made of PVC and meets European EN71-3 and SGS environmental standards. It is a 3D type with a thickness of 0.29mm, excluding the backing film, and has an average life of 3 years.

The package includes 1 roll of window film and instructions for installation. The film is static cling, removable, and reusable, making it a versatile and convenient option.

To install the window film, follow these steps:

1. Make a wetting solution by mixing 8 drops of mild, non-moisturizing dish detergent (not hand soap) in a 32-oz. spray bottle filled with clean water.
2. Prepare a dust-free work area with enough space to lay out the film for measuring, cutting, and prepping.
3. Measure the height and width of the glass surface, then cut the film, leaving an extra inch around all sides.
4. Thoroughly clean the glass surface to remove any dust, grime, or grease.
5. Peel back the liner, thoroughly wetting the static side of the film as you go.
6. Spray and soak the glass surface and the static side of the film with the water mixture.
7. Place the wet film onto the wet surface, then use a squeegee to smooth out and press the film against the glass, starting from the center and moving outward.
8. Trim the excess film from the edges using a hard card and a razor knife.

Frequently Asked Questions:

1. How to deal with air bubbles? Use a hard plastic squeegee or card to squeegee out air bubbles and water. If needed, uncover the film, spray more water between the glass and the film, and squeegee firmly again.
2. Why does the film fall off after a while? Ensure you've removed the liner, trimmed the edges, and squeeged out excess water and bubbles. Leave a 1/16" gap around the edges to allow for thermal expansion.
3. Can I remove the film at a later stage? Yes, the film is removable and reusable.
4. How to peel off the backing liner? If the liner is hard to see, use pieces of scotch tape on both sides to create tabs and separate the two sides.

The VELIMAX White Lattice Window Frosted Film is a non-adhesive, environmentally friendly, and easy-to-install solution that provides privacy, heat control, and a decorative touch to your windows and doors.

product information: